GPS Site Control - Keep it Level
It seems simple but, too often, machine control basics like keeping the rover level and stable are overlooked when calibrating GPS to a cons
Case CE Factory Fit Leica Machine Control
Case Construction is now offering Leica 3D and 2D machine control right from the factory.
Caterpillar Operator Stadium - Conexpo 2020
Quantum Land Design played a hidden, but big part in Caterpillar's Operator Stadium demos at Conexpo/Con-Agg 2020.
Ground Control - Principle 4
Another important consideration when laying out your ground control is topo check shots.
Ground Control - Principle 5
ALWAYS, and only, measure in your ground control with a rover that is fully calibrated to the site control for your GPS system.
Komatsu PC490LCi Underwater Wall Grinding
This Komatsu Construction 490LCi is grinding a wall, underwater, in a barge lock.
Ground Control - Principle 3
To start, place a GCP on roughly the highest and lowest spots on your project. Don't worry about...
Ground Control - Principle 2
Surrounding the site with ground control is a simple, but often overlooked, step. Usually four to six GCP's...
